Fence Pressure Washing & Painting Melbourne
Professional fence pressure washing and painting that strips moss, algae, grime, and weather staining from timber, Colorbond, paling, and brick fences — then applies a fresh protective coat. Restore your fence's appearance without the cost of replacement, and make the whole street look better.
Everything You Get —
Nothing Hidden.
Moss & Algae Stripping
Green and black algae, moss, and lichen stripped from every fence surface — the organic growth that makes fences look old before their time. We adjust pressure for each material so the clean is deep without causing damage.
Grime & Stain Removal
Atmospheric dirt, pollution staining, water streak marks, and splash-back grime blasted away — revealing the original colour and texture underneath. The difference is immediately visible.
Material-Specific Technique
Timber paling fences, Colorbond, brick, and rendered fences all get the right pressure and approach. We test a small area first on sensitive surfaces and adjust to clean deeply without etching or damaging the material.
Fence Painting & Repainting
Once the fence is clean and dry, we apply premium exterior paint suited to the material — timber stain or acrylic for paling fences, specialised metal paint for Colorbond, and masonry paint for brick and render. A fresh coat seals the surface, protects against weather, and gives your fence a brand-new look.
Fixed Quote From Photos
Snap a few photos of your fence from both sides and send them through. We send a fixed, tailored quote within 30 minutes. No inspection needed, no deposit to book, no obligation.
The Cost of Doing Nothing
Ignoring the problem never makes it cheaper. Here is what happens when fence pressure washing & painting gets put off.
Moss and algae on fences thrive in Melbourne's damp climate — particularly on south-facing and shaded fences. Left unchecked, they trap moisture against the surface, accelerating timber rot and coating breakdown.
A dirty, faded fence drags down the entire street appeal of your property. It is the first boundary people see, and grime-streaked, moss-covered, peeling fencing makes even a well-maintained home look neglected.
Fence replacement costs thousands — fence pressure washing and repainting costs a fraction of that and restores the appearance without the disruption, mess, and expense of a full rebuild.
Repainting after cleaning seals the surface against moisture, UV, and pollution — extending the life of your fence and keeping it looking fresh for years rather than months.
Fence Pressure Washing & Painting in Melbourne
Melbourne's climate — wet winters, humid summers, and plenty of overcast days — creates ideal conditions for moss, algae, and lichen to colonise fence surfaces. South-facing fences, fences under tree canopy, and fences in sheltered courtyards are particularly vulnerable. The green and black growth that appears is not just cosmetic — it traps moisture against the surface and accelerates the breakdown of timber, paint, and metal coatings.
Fence pressure washing strips that growth off the surface, restoring the original colour and texture without the cost and disruption of fence replacement. For timber paling fences, it reveals the natural timber colour beneath years of grime. For Colorbond and powder-coated fences, it removes the pollution streaks and splash-back stains that make them look weathered. For brick and rendered fences, it removes moss from mortar joints and staining from the surface.
Once the fence is clean and fully dry, we apply a fresh coat of premium exterior paint matched to the material. Timber paling fences take a quality timber stain or exterior acrylic that penetrates and protects the grain. Colorbond and powder-coated fences take a specialised metal-adhesion paint that bonds to the existing coating. Brick and render take a durable masonry paint. The result is a fence that looks brand new — sealed against the weather and protected for years.
Is Pressure Washing Safe for Every Fence Type?
Yes — when the pressure and technique are matched to the material. Timber paling fences require lower pressure (around 1,500-2,000 PSI) with a wider fan pattern to avoid splintering and raising the grain. We clean along the grain, not across it, to minimise surface disruption.
Colorbond and powder-coated metal fences need moderate pressure with attention to the coating condition. If the powder coating is already failing, we reduce pressure to avoid lifting more coating. For intact coatings, moderate pressure removes pollution streaks and splash-back without any risk.
Brick and rendered fences handle higher pressure (up to 4,000 PSI) for moss removal from mortar joints and surface staining. We use rotary or wide-fan nozzles to distribute the pressure evenly rather than concentrating it on a small area. Rendered surfaces get tested first and adjusted to avoid surface damage.
Fence Cleaning & Painting Cost in Melbourne
Your exact fixed price for fence pressure washing and painting depends on the fence length, material, height, the severity of moss and grime, and whether you want repainting included — all assessed from your photos.
Send us a few photos of your fence from both sides and we will send a fixed, tailored quote within 30 minutes. No on-site inspection required, no deposit to book, no obligation. If the price works, we schedule the clean and paint.
Fence cleaning and painting pairs perfectly with driveway and path cleaning — bundle them for a complete boundary-to-boundary property refresh. When you book a roof restoration, ask about including fence cleaning and painting in the package for full curb appeal.
Ready for a fence pressure washing & painting that lasts?
Send us a few photos and we will call you back within 30 minutes with a fixed, honest price. No on-site inspection, no deposit, no obligation.
Get Your Free Fence Pressure Washing & Painting Quote
Send us a few photos and we'll respond within 30 minutes with a fixed price. No inspection, no deposit, no obligation.
Frequently Asked
Your exact fixed price depends on fence length, material, height, staining severity, and whether you want repainting included. Send us photos and we will give you a fixed tailored quote within 30 minutes — no inspection needed, no deposit, no obligation.
Yes — when done with the right pressure and technique. We use lower pressure (1,500-2,000 PSI) with a wide fan pattern on timber, cleaning along the grain rather than across it. This removes moss, algae, and grime without splintering the timber or raising the grain. We test a small area first and adjust if needed.
Yes. We use moderate pressure and assess the coating condition before cleaning. If the powder coating is intact, we remove pollution streaks and splash-back stains without any risk. If the coating is already failing, we reduce pressure to avoid lifting more coating and will tell you honestly if repainting is needed instead of cleaning.
Yes. Once the fence is clean and fully dry, we apply a premium exterior paint suited to the material — timber stain or acrylic for paling fences, specialised metal paint for Colorbond, and masonry paint for brick and render. The fresh coat seals the surface against moisture and UV and gives your fence a brand-new appearance that lasts for years.
Yes. Moss, algae, lichen, and organic growth are stripped from the surface during pressure washing. For heavily moss-affected fences, the difference is dramatic — the original colour and texture reappear immediately. We can also discuss applying a moss-inhibitor treatment after cleaning to slow regrowth.
A properly cleaned and repainted fence stays looking fresh for 3-5 years depending on exposure to moisture, shade, and tree coverage. The paint acts as a protective barrier against UV, rain, and pollution — far longer than a clean alone. South-facing and shaded fences may need maintenance sooner.
Yes. We operate across Melbourne and Sydney metro areas. Contact us with your suburb and we will confirm we cover it — we likely do.
Other Pressure Services
Bundle services for better value. One crew, one visit, your entire property transformed.